巢湖附近有没有服务

Tel: 027-67845207

Mobile phone: 17798235881
Email: rflaser @ mantriwebcity.com
Website: mantriwebcity.com
Address: Juxian building, international enterprise center, Guanggu Avenue, Donghu high tech Development Zone

Production base: Ruifeng Industrial Park, Hengdian, Huangpi District, Wuhan City

Matters needing attention in using laser cleaning machine

Time: 2020-09-21 15:59 Reading: one hundred and eighty-two second
Attention must be paid to maintenance during operation, and normal attention to maintenance and maintenance can increase the service life of the equipment, save costs and create greater benefits. Here's how it works Laser cleaning machine Notes on the use of.

In today's advocating environmental protection, laser cleaning machine has the characteristics of non-contact, no thermal effect and no mechanical force on the surface of cleaning objects. It is widely used in industry. What should be paid attention to when using laser cleaning machine?

1. Follow the turn-on sequence of the machine: turn on the water pump (water chiller) first, then the power switch, and then the laser switch. Turn off the laser switch first, then the power switch, and then the water pump (water chiller).

2. Clean the chiller of the laser machine regularly every half a month, drain the visceral water of the machine, and then fill it with new purified water (dirty water will affect the lighting effect);

3. It is required to clean the table, limiter and guide rail regularly and quantitatively every day, and spray lubricating oil on the guide rail;

4. The reflector and focusing lens should be scrubbed with special cleaning solution every 6-8 hours. During scrubbing, cotton swab or cotton stick should be dipped in cleaning solution to scrub anticlockwise from the center to the edge of the focusing lens. At the same time, care should be taken to avoid scratching the lens;

5. Cleaning method of exhaust fan and smoke pipe: when the dust is large during processing, it is necessary to clean the fan, remove the fan cover, scrape the dust on the fan blade and air channel with thin wood chips, and then blow the dust with high-pressure Qi gun. The cleaning method of smoke pipe is the same as that of water cleaning of exhaust fan. (Note: do not let water in the exhaust pipe and extend to wet places, such as sewers).

During the operation of the laser cleaning machine, a large amount of corrosive dust and smoke will be produced during the processing of the processed parts. Based on these smoke and dust, a large number of them are deposited on the surface of the guide rail and linear shaft for a long time, which has a great impact on the processing accuracy of the equipment, and will form corrosion spots on the surface of the linear axis of the guide rail, thus shortening the service life of the equipment. In order to ensure the normal and stable operation of the machine and ensure the processing quality of the products, it is necessary to do a good job in the daily maintenance of the guide rail and linear shaft.



Recommendation related




Application of laser cleaning machine in removing wheel rust




Application of laser cleaning technology in stainless steel surface cleaning machine




Application of laser cleaning machine in metal surface paint removal